diy budget aquaponics simplified plumbing design | Aquaponic Gardening Stocking Densities

diy budget aquaponics simplified plumbing design

The term of aquaponics stoking densities refers to the number of fish that need to be grown in the aquaponics systems fish tanks.
 

More fish in your aquaponics systems means more profit, however stocking too many fish will lead to ill health of both fish and plants. The fish will not grow as well and will start dying, and there will be a buildup of wastes which will be toxic to both fish and plants.
 

Therefore, you need to find the perfect balance of stocking as many fish as possible before this starts having an adverse effect on their growth.
 

The question is how to measure the stocking densities for your aquaponics systems?
 

If you are looking for a short answer on the Aquaponics stocking densities to use, then go for 1 fish 

per 10 liters of water.
 

Now for the longer answer.
 

It is more accurate to talk about stocking densities in terms of kilograms of fish per cubic meter or liters of waters.
 

For most Aquaponics systems set-ups, you should go for 30 to 40 kg of fish per 1000 liters. Use this rule of thumb as a maximum number, and opt for a lower number if you are new to Aquaponics gardening.
 

Just keep in mind that apart from the stocking density, the amount of food you put into the tanks will also dictate how well the system runs – if you feed too much, there will be an accumulation of waste that the bacteria may not be able to handle.
 

Example:
 

The most common fish used in Aquaponics gardening is tilapia.
 

So let’s work out stocking densities in terms of tilapia.
 

When you buy 100 tilapia fingerlings, these may weigh a kilo combined. If we have a 1000 liter fish tank, then our current stocking density is 1kg/1000L. Tilapia grow quickly and soon enough they’ll weigh a combined total of say 40kg, giving us a stocking density of 40kg/1000L.
 

By using the rule of thumb of one fish per ten liters of water, then you’ll have to harvest the fish as soon as they’re big enough, or else you’ll end up with a stocking density which is straining the system.
 

Individual fish grow at different rates, and you should start taking out the large ones as soon as they’re big enough to eat.
 

Do not wait until all of them are big enough. This is actually a good thing, as you will have to harvest at a rate at which you can eat/sell them and not have to freeze a large quantity of fish.
 

You can actually harvest a single lot of fish over several months, as the rates of growth of individual fish are so different.
 

This applies even to fish species with particularly fast growing rates, such as trout.

Do you find information about diy budget aquaponics simplified plumbing design are you looking for? If not, below may help you find more information about the diy budget aquaponics simplified plumbing design. Thank you for visiting, have a great day.

Related Posts by Categories