diy aquaponics arduino | The Storm door is on

diy aquaponics arduino

I have finished placing the storm door that my neighbor donated to the project and it turned out very well. After leaving the door in a closed position with the window on the door open and the other two windows open in the greenhouse I checked the inside temp and in the direct afternoon sun with outside temps at 103 degrees, the inside temp jumped to 115 degrees and more later in the afternoon. Way to hot for any plants to survive. I have ordered a gable mounted attic fan that is solar powered and will install it in one end of the greenhouse to help with air flow and temperature. I am scouring craigslist fror a good used Swamp Cooler to use in the greenhouse as well...hopefully I will find one soon. Even with a relative humidity of 50% I should be able to drop the temp 10-15 degrees on a hot day, and with low pressure water misting maybe even a few degrees more.

 Here are some pics of the greenhouse as it stands now after several weeks worth of work. I still need to place the substrate / bedding for the floor in the greenhouse and then I can start building my aeroponics system.

More updates to follow once I receive the attic fan, this has been alot of fun to put together.

Do you find information about diy aquaponics arduino are you looking for? If not, below may help you find more information about the diy aquaponics arduino. Thank you for visiting, have a great day.

Related Posts by Categories